N-Line Axial Flow Control Valve
Bonnet Entry Body Design 4", 6", 8" 10" & 12"

4" to 12" size valves are constructed utilizing a forged body with a bolted bonnet.  The ability to perform maintenance in the field without the need to remove the valve from the line reduces the life cycle cost of these valves.

The trim is retained without the use of internal threads in the body thereby allowing for ease of maintenance.

The bonnet of this valve contains the stem seals and is pre-drilled and tapped to allow for easy fitting of actuators.

Special stem seals such as fire-safe and low fugitive emission packing arrangements are easily accommodated within the standard bonnet design.

6" and 10" 10,000 psi rated surge
control valves awaiting shipment to a
Gulf of Mexico gas production platform

Quarter turn actuators are
easily mounted on existing
points in the bonnet